Restructure shutdown flow and behavior for improved robustness * file-editor-interface.h (file_editor_interface::check_closing): Remove closing_state argument from input. * file-editor-tab.cc (file_editor_tab::_cancelled): New static variable for managing chain of file closes. (file_editor_tab::file_editor_tab): Discard _app_closing and _modal_dialog initializations. (file_editor_tab::closeEvent): Upon accepting the close event, als request tab removal. (file_editor_tab::check_modified_file): New simple routine checking for modified file if there hasn't been cancellation yet. (file_editor_tab::run_file): Remove use of _modal_dialog. (file_editor_tab::show_dialog): Add modal input setting. Remove use of _app_closing and _modal_dialog. (file_editor_tab::check_file_modified): Remove situational message for just one. If modified, call show_dialog with modal true, return QMessageBox::Cancel if anything cancelled, otherwise the user decision. (file_editor_tab::handle_file_modified_answer): Do not remove file editor tab in any case. If user cancelled, set _cancelled true. (file_editor_tab::save_file): Add "false" (non-modal) to show_dialog() call. (file_editor_tab::save_file_as): Add "false" (non-modal) to show_dialog() call. (file_editor_tab::conditional_close): Remove input argument and use of variable _app_closing. * file-editor-tab.h (file_editor_tab::conditional_close): Remove input argument. (file_editor_tab::reset_cancel): New member function declaration for managing cancellation of tab chain saves. (file_editor_tab::was_cancel): New member function for indicating any cancellation when saving modified files. (file_editor_tab::check_modified_file): New slot declaration for checking and saving file modifications. (file_editor_tab::show_dialog): Add modal option input argument. (file_editor_tab::_app_closing, file_editor_tab::_modal_dialog): Remove. (file_editor_tab::_cancelled): Add. * file-editor.cc (file_editor::file_editor): Remove _check_closing_done initialization. (file_editor::~file_editor): Remove use of _check_closing_done and check_closing(). (file_editor::check_closing): Clear cancellation history and check all files for modifications, without closing. Close all tabs and delete associated widgets if no cancellation. Remove use of _check_closing_done. (file_editor::request_close_file): Remove argument from conditional_close() function call. (file_editor::request_close_all_files): Ditto. (file_editor::request_close_other_files): Ditto. (file_editor::handle_tab_close_request): Ditto. (file_editor::handle_tab_remove_request): Add comment about deleting sender. (file_editor::add_file_editor_tab): Connect fetab_check_modified_file signal to check_modified_file slot. * file-editor.h (file_editor::fetab_check_modified_file): New signal. (file_editor::check_closing): Remove input argument. (file_editor::_check_closing_done): Remove. * main-window.cc (main_window::confirm_shutdown_octave): Rename of member function main_window::confirm_exit_octave(). Change return type to void. Set octave/qt link confirmation result then awake worker process. (main_window::exit_app): Rename of member function main_window::exit(). (main_window::closeEvent): Rather than post callback event, queue "exit" in the command buffer. (main_window::construct_octave_qt_link): Connect confirm_shutdown_signal to confirm_shutdown_octave slot. Connect exit_app_signal to exit_app slot. (main_window::exit_callback): Remove. (main_window::confirm_exit_octave): Renamed as confirm_shutdown_octave(). * main-window.h (main_window::confirm_shutdown_octave): Rename of slot confirm_exit_octave(). (main_window::exit): Renamed exit_app(). (main_window::exit_callback): Removed declaration. (main_window::confirm_exit_octave): Renamed confirm_shutdown_octave(). * octave-qt-link.cc (octave_qt_link::do_confirm_shutdown): New virtual function definition for initiating GUI shutdown and confirm exit. Worker process goes into sleep mode after issuing cross-thread signal. Return confirmation result. (octave_qt_link::do_exit): Change exit_signal to exit_app_signal. octave-qt-link.h (octave_qt_link::do_confirm_shutdown): New virtual function declaration for qt GUI. (octave_qt_link::mutex): Added. A QMutex for communicating with Qt GUI. (octave_qt_link::waitcondition): Added. For process wait. (octave_qt_link::shutdown_confirmation): Added. Store confirmation result. (octave_qt_link::_shutdown_confirm_result): Added. Confirmation result. (octave_qt_link::exit_signal): Signal renamed exit_app_signal. (octave_qt_link::confirm_shutdown_signal): Added. (octave_qt_link::exit_app_signal): Renamed of exit_signal. octave-link.h (octave_link::confirm_shutdown): Added. Access virtual function do_confirm_shutdown. (octave_link::do_confirm_shutdown): Added. Virtual function for GUI link. toplev.cc (clean_up_and_exit): Change 'retval' to 'status', as header file uses argument name 'status'. (quit): First initiate GUI shutdown via octave_link::confirm_shutdown() and if not confirmed, immediately return thereby avoiding exit sequence.

# Bootstrap configuration.

# Copyright (C) 2009-2015 John W. Eaton
# Copyright (C) 2006-2007, 2009-2012 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


# gnulib modules used by this package.
gnulib_modules="
  base64
  canonicalize
  chdir
  close
  closedir
  copysign
  copysignf
  crypto/md5
  dup2
  fclose
  fcntl
  fflush
  filemode
  float
  floor
  floorf
  fnmatch
  fopen
  fpucw
  frexp
  frexpf
  fseek
  ftell
  getcwd
  gethostname
  getopt-gnu
  gettimeofday
  glob
  isatty
  largefile
  link
  log
  log2
  log2-ieee
  log2f
  log2f-ieee
  logf
  lstat
  malloc-gnu
  mbrtowc
  mkdir
  mkfifo
  mkostemp
  mktime
  nanosleep
  nproc
  open
  opendir
  pathmax
  progname
  putenv
  readdir
  readlink
  realloc-gnu
  rename
  rmdir
  round
  roundf
  select
  sigaction
  signal
  sigprocmask
  sleep
  stat
  stddef
  stdint
  stdio
  strerror
  strftime
  strptime
  symlink
  sys_stat
  sys_time
  sys_times
  tempname
  time
  times
  tmpfile
  trunc
  truncf
  uname
  unistd
  unlink
  unsetenv
  vasprintf
"

# Additional xgettext options to use.  Use "\\\newline" to break lines.
XGETTEXT_OPTIONS=$XGETTEXT_OPTIONS'\\\
 --from-code=UTF-8\\\
 --flag=asprintf:2:c-format --flag=vasprintf:2:c-format\\\
 --flag=asnprintf:3:c-format --flag=vasnprintf:3:c-format\\\
 --flag=wrapf:1:c-format\\\
'

# If "AM_GNU_GETTEXT(external" or "AM_GNU_GETTEXT([external]"
# appears in configure.ac, exclude some unnecessary files.
# Without grep's -E option (not portable enough, pre-configure),
# the following test is ugly.  Also, this depends on the existence
# of configure.ac, not the obsolescent-named configure.in.  But if
# you're using this infrastructure, you should care about such things.

gettext_external=0
grep '^[	 ]*AM_GNU_GETTEXT(external\>' configure.ac > /dev/null &&
  gettext_external=1
grep '^[	 ]*AM_GNU_GETTEXT(\[external\]' configure.ac > /dev/null &&
  gettext_external=1

if test $gettext_external = 1; then
  # Gettext supplies these files, but we don't need them since
  # we don't have an intl subdirectory.
  excluded_files='
      m4/glibc2.m4
      m4/intdiv0.m4
      m4/lcmessage.m4
      m4/lock.m4
      m4/printf-posix.m4
      m4/size_max.m4
      m4/uintmax_t.m4
      m4/ulonglong.m4
      m4/visibility.m4
      m4/xsize.m4
  '
fi

# Build prerequisites
buildreq="\
autoconf   2.59
automake   1.9.6
git        1.5.5
tar        -
"
checkout_only_file=etc/HACKING
gnulib_tool_option_extras="--libtool"
gnulib_name="libgnu"
source_base="libgnu"

# Don't use git to update gnulib sources. We keep gnulib under a
# Mercurial subrepository instead.
use_git=false
GNULIB_SRCDIR=gnulib-hg

# Don't check for translations since we don't have any in Octave yet.
# This avoids the need for sha1sum or compatible utility in bootstrap.
SKIP_PO=true

bootstrap_post_import_hook ()
{
  ## Check for files that automake --gnu would normally look for, except
  ## AUTHORS, which we autogenerate from the documentation files along
  ## with building the rest of Octave, and INSTALL, which is linked from
  ## gnulib/doc/INSTALL by the bootstrap script.

  for f in NEWS README COPYING CITATION; do
    if ! test -f $f; then
      echo "required file $f is missing" 2>&1
      exit 1
    fi
  done

  echo "generating source lists for liboctave/operators/module.mk..."

  (cd liboctave/operators; ./config-ops.sh)

  echo "generating doc/interpreter/images.mk..."

  (cd doc/interpreter; ./config-images.sh)

  echo "generating libinterp/dldfcn/module.mk..."

  (cd libinterp/dldfcn; ./config-module.sh)
}