Mercurial > octave
view scripts/plot/private/__fltk_print__.m @ 14868:5d3a684236b0
maint: Use Octave coding conventions for cuddling parentheses in scripts directory
* lin2mu.m, loadaudio.m, wavread.m, accumarray.m, bicubic.m, celldisp.m,
colon.m, cplxpair.m, dblquad.m, divergence.m, genvarname.m, gradient.m,
int2str.m, interp1.m, interp1q.m, interp2.m, interpn.m, loadobj.m, nthargout.m,
__isequal__.m, __splinen__.m, quadgk.m, quadl.m, quadv.m, rat.m, rot90.m,
rotdim.m, saveobj.m, subsindex.m, triplequad.m, delaunay3.m, griddata.m,
inpolygon.m, tsearchn.m, voronoi.m, get_first_help_sentence.m, which.m,
gray2ind.m, pink.m, dlmwrite.m, strread.m, textread.m, textscan.m, housh.m,
ishermitian.m, issymmetric.m, krylov.m, logm.m, null.m, rref.m,
compare_versions.m, copyfile.m, dump_prefs.m, edit.m, fileparts.m,
getappdata.m, isappdata.m, movefile.m, orderfields.m, parseparams.m,
__xzip__.m, rmappdata.m, setappdata.m, swapbytes.m, unpack.m, ver.m, fminbnd.m,
fminunc.m, fsolve.m, glpk.m, lsqnonneg.m, qp.m, sqp.m, configure_make.m,
copy_files.m, describe.m, get_description.m, get_forge_pkg.m, install.m,
installed_packages.m, is_architecture_dependent.m, load_package_dirs.m,
print_package_description.m, rebuild.m, repackage.m, save_order.m, shell.m,
allchild.m, ancestor.m, area.m, axes.m, axis.m, clabel.m, close.m, colorbar.m,
comet.m, comet3.m, contour.m, cylinder.m, ezmesh.m, ezsurf.m, findobj.m,
fplot.m, hist.m, isocolors.m, isonormals.m, isosurface.m, isprop.m, legend.m,
mesh.m, meshz.m, pareto.m, pcolor.m, peaks.m, plot3.m, plotmatrix.m, plotyy.m,
polar.m, print.m, __add_datasource__.m, __add_default_menu__.m,
__axes_limits__.m, __bar__.m, __clabel__.m, __contour__.m, __errcomm__.m,
__errplot__.m, __ezplot__.m, __file_filter__.m, __fltk_print__.m,
__ghostscript__.m, __gnuplot_print__.m, __go_draw_axes__.m,
__go_draw_figure__.m, __interp_cube__.m, __marching_cube__.m, __patch__.m,
__pie__.m, __plt__.m, __print_parse_opts__.m, __quiver__.m, __scatter__.m,
__stem__.m, __tight_eps_bbox__.m, __uigetdir_fltk__.m, __uigetfile_fltk__.m,
__uiputfile_fltk__.m, quiver.m, quiver3.m, rectangle.m, refreshdata.m,
ribbon.m, scatter.m, semilogy.m, shading.m, slice.m, subplot.m, surface.m,
surfl.m, surfnorm.m, text.m, uigetfile.m, uiputfile.m, whitebg.m, deconv.m,
mkpp.m, pchip.m, polyaffine.m, polyder.m, polygcd.m, polyout.m, polyval.m,
ppint.m, ppjumps.m, ppval.m, residue.m, roots.m, spline.m, splinefit.m,
addpref.m, getpref.m, setpref.m, ismember.m, setxor.m, arch_fit.m, arch_rnd.m,
arch_test.m, autoreg_matrix.m, diffpara.m, fftconv.m, filter2.m, hanning.m,
hurst.m, periodogram.m, triangle_sw.m, sinc.m, spectral_xdf.m, spencer.m,
stft.m, synthesis.m, unwrap.m, yulewalker.m, bicgstab.m, gmres.m, pcg.m, pcr.m,
__sprand_impl__.m, speye.m, spfun.m, sprandn.m, spstats.m, svds.m,
treelayout.m, treeplot.m, bessel.m, factor.m, legendre.m, perms.m, primes.m,
magic.m, toeplitz.m, corr.m, cov.m, mean.m, median.m, mode.m, qqplot.m,
quantile.m, ranks.m, zscore.m, logistic_regression_likelihood.m,
bartlett_test.m, chisquare_test_homogeneity.m, chisquare_test_independence.m,
kolmogorov_smirnov_test.m, run_test.m, u_test.m, wilcoxon_test.m, z_test.m,
z_test_2.m, bin2dec.m, dec2base.m, mat2str.m, strcat.m, strchr.m, strjust.m,
strtok.m, substr.m, untabify.m, assert.m, demo.m, example.m, fail.m, speed.m,
test.m, now.m: Use Octave coding conventions for cuddling parentheses in
scripts directory.
author | Rik <octave@nomad.inbox5.com> |
---|---|
date | Tue, 17 Jul 2012 07:08:39 -0700 |
parents | 86854d032a37 |
children | 049e8bbff782 |
line wrap: on
line source
## Copyright (C) 2010-2012 Shai Ayal ## ## This file is part of Octave. ## ## Octave is free software; you can redistribute it and/or modify it ## under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 3 of the License, or (at ## your option) any later version. ## ## Octave is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with Octave; see the file COPYING. If not, see ## <http://www.gnu.org/licenses/>. ## -*- texinfo -*- ## @deftypefn {Function File} {} __fltk_print__ (@var{@dots{}}) ## Undocumented internal function. ## @end deftypefn function opts = __fltk_print__ (opts) dos_shell = (ispc () && ! isunix ()); figure (opts.figure); drawnow ("expose"); __fltk_redraw__ (); if (! isempty (opts.fig2dev_binary)) ## fig2dev is prefered for conversion to emf fig2dev_devices = {"pstex", "mf", "emf"}; else fig2dev_devices = {"pstex", "mf"}; endif gl2ps_device = {}; pipeline = {}; switch (lower (opts.devopt)) case {"eps", "eps2", "epsc", "epsc2"} ## format GL2PS_EPS gl2ps_device = {"eps"}; ## FIXME - use epstool to tighten bbox and provide preview. pipeline = {opts.epstool_cmd(opts, "-", opts.name)}; case {"epslatex", "pslatex", "pdflatex", "epslatexstandalone", ... "pslatexstandalone", "pdflatexstandalone"} ## format GL2PS_TEX n = find (opts.devopt == "l", 1); suffix = opts.devopt(1:n-1); dot = find (opts.name == ".", 1, "last"); if ((! isempty (dot)) && any (strcmpi (opts.name(dot:end), ... {strcat(".", suffix), ".tex", "."}))) name = opts.name(1:dot-1); if (dot < numel (opts.name) && any (strcmpi (opts.name(dot+1:end), {"eps", "ps", "pdf"}))) ## If user provides eps/ps/pdf suffix, use it. suffix = opts.name(dot+1:end); endif else error ("print:invalid-suffix", "invalid suffix `%s' for device `%s'.", opts.name(dot:end), lower (opts.devopt)); endif gl2ps_device = {sprintf("%snotxt", lower (suffix))}; gl2ps_device{2} = "tex"; if (dos_shell) ## FIXME - this will only work on MinGW with the MSYS shell pipeline = {sprintf("cat > %s-inc.%s", name, suffix)}; pipeline{2} = sprintf ("cat > %s.tex", name); else pipeline = {sprintf("cat > %s-inc.%s", name, suffix)}; pipeline{2} = sprintf ("cat > %s.tex", name); endif case "tikz" ## format GL2PS_PGF gl2ps_device = {"pgf"}; pipeline = {sprintf("cat > %s", opts.name)}; case "svg" ## format GL2PS_SVG gl2ps_device = {"svg"}; pipeline = {sprintf("cat > %s", opts.name)}; case fig2dev_devices cmd_pstoedit = opts.pstoedit_cmd (opts, "fig"); cmd_fig2dev = opts.fig2dev_cmd (opts, opts.devopt); if (strcmp (opts.devopt, "pstex")) [~, ~, ext] = fileparts (opts.name); if (any (strcmpi (ext, {".ps", ".tex", "."}))) opts.name = opts.name(1:end-numel(ext)); endif opts.name = strcat (opts.name, ".ps"); cmd = sprintf ("%s | %s > %s", cmd_pstoedit, cmd_fig2dev, opts.name); gl2ps_device = {"eps"}; pipeline = {cmd}; cmd_fig2dev = opts.fig2dev_cmd (opts, "pstex_t"); gl2ps_device{2} = "eps"; pipeline{2} = sprintf ("%s | %s > %s", cmd_pstoedit, cmd_fig2dev, strrep(opts.name, ".ps", ".tex")); else cmd = sprintf ("%s | %s > %s", cmd_pstoedit, cmd_fig2dev, opts.name); gl2ps_device = {"eps"}; pipeline = {cmd}; endif case "aifm" cmd = opts.pstoedit_cmd (opts, "ps2ai"); gl2ps_device = {"eps"}; pipeline = {sprintf("%s > %s", cmd, opts.name)}; case {"dxf", "emf", "fig", "hpgl"} cmd = opts.pstoedit_cmd (opts); gl2ps_device = {"eps"}; pipeline = {sprintf("%s > %s", cmd, opts.name)}; case {"corel", "gif"} error ("print:unsupporteddevice", "print.m: %s output is not available for the FLTK graphics toolkit", upper (opts.devopt)); case opts.ghostscript.device opts.ghostscript.source = "-"; opts.ghostscript.output = opts.name; if (opts.send_to_printer) opts.unlink(strcmp (opts.unlink, opts.ghostscript.output)) = []; opts.ghostscript.output = "-"; endif [cmd_gs, cmd_cleanup] = __ghostscript__ (opts.ghostscript); if (opts.send_to_printer || isempty (opts.name)) cmd_lpr = opts.lpr_cmd (opts); cmd = sprintf ("%s | %s", cmd_gs, cmd_lpr); else cmd = sprintf ("%s", cmd_gs); endif if (! isempty (cmd_cleanup)) gl2ps_device = {"eps"}; if (dos_shell) pipeline = {sprintf("%s & %s", cmd, cmd_cleanup)}; else pipeline = {sprintf("%s ; %s", cmd, cmd_cleanup)}; endif else gl2ps_device = {"eps"}; pipeline = {cmd}; endif otherwise error (sprintf ("print:no%soutput", opts.devopt), "print.m: %s output is not available for GL2PS output", upper (opts.devopt)); endswitch opts.pipeline = pipeline; ## Tell gl2ps to use different rendering options for 2D plots haxes = findall (opts.figure, "type", "axes"); vw = get (haxes, "view"); if (iscell (vw)) vw = vertcat (vw{:}); endif is2D = all (abs (vw(:,2)) == 90); if (is2D) gl2ps_device{end} = [gl2ps_device{end}, "is2D"]; endif for n = 1:numel (pipeline) if (opts.debug) fprintf ("fltk-pipeline: '%s'\n", pipeline{n}); endif drawnow (gl2ps_device{n}, strcat ('|',pipeline{n})); endfor if (! isempty (strfind (opts.devopt, "standalone"))) opts.latex_standalone (opts); endif endfunction