# HG changeset patch # User Mike Miller # Date 1572036789 25200 # Node ID c8543d9a4bffa79515f3795fe5ae628b0da152c4 # Parent 3af3665348a1d2ad0a78aa521cab93113a17a1d2 Empty the repository, leave a note about where development has been moved diff -r 3af3665348a1 -r c8543d9a4bff .hgignore --- a/.hgignore Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,38 +0,0 @@ -syntax: regexp -# The recurrent (^|/) idiom in the regexps below should be understood -# to mean "at any directory" while the ^ idiom means "from the -# project's top-level directory". - -# These directories and files are created by GNU autotools -^Makefile\.in$ -^aclocal\.m4$ -^autom4te\.cache($|/) -^build-aux($|/) -^config\.h\.in$ -^configure$ - -# This directory contains m4 files managed by GNU libtool, but also contains -# some files maintained in the repository -^m4/(libtool|lt.+)\.m4$ - -# These files are created by running configure -(^|/)Makefile$ -(^|/)config\.h$ -(^|/)config\.log$ -(^|/)config\.status$ -(^|/)libtool$ -(^|/)stamp-h1$ - -# These files are normal build system artifacts -(^|/).+\.cc-tst$ -(^|/).+\.l?[ao]$ -(^|/).+\.oct$ -(^|/).+\.tar\.gz$ -(^|/)PKG_(ADD|DEL)$ -(^|/)\.deps($|/) -(^|/)\.libs($|/) -(^|/)fntests\.log$ -(^|/)octave-workspace$ - -# This directory contains Doxygen generated documentation -^doc($|/) diff -r 3af3665348a1 -r c8543d9a4bff @py/py.m --- a/@py/py.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,59 +0,0 @@ -## Copyright (C) 2016 Mike Miller -## -## This file is part of Pytave. -## -## Pytave is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 3 of the License, or (at -## your option) any later version. -## -## Pytave is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with Pytave; see the file COPYING. If not, see -## . - -## -*- texinfo -*- -## @deftypefn {} {} py -## @deftypefnx {} {} py.@var{pyname} -## Get the value of a Python object or call a Python function. -## @end deftypefn - -function p = py () - p = class (struct (), "py"); -endfunction - -%!assert (py.math.sqrt (2), sqrt (2)) -%!assert (ischar (char (py.sys.version))) - -%!test -%! if (double (py.sys.hexversion) >= 0x03000000) -%! assert (isobject (py.int (0))) -%! else -%! assert (py.int (0), int64 (0)) -%! endif - -%!test -%! if (double (py.sys.hexversion) < 0x03000000) -%! assert (py.int (2147483647), int64 (2147483647)) -%! endif - -%!test -%! if (double (py.sys.hexversion) < 0x03000000) -%! assert (isobject (py.long (0))) -%! endif - -%!test -%! if (double (py.sys.hexversion) >= 0x03000000) -%! assert (isobject (py.int (2^100))) -%! else -%! assert (isobject (py.long (2^100))) -%! endif - -## Cannot use '@' to make a handle to a Python function -%!xtest -%! fn = @py.math.abs; -%! assert (fn (-3), 3) diff -r 3af3665348a1 -r c8543d9a4bff @py/subsref.m --- a/@py/subsref.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,72 +0,0 @@ -## Copyright (C) 2016 Mike Miller -## -## This file is part of Pytave. -## -## Pytave is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 3 of the License, or (at -## your option) any later version. -## -## Pytave is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with Pytave; see the file COPYING. If not, see -## . - -## -*- texinfo -*- -## @deftypefn {} {} subsref (@var{x}, @var{idx}) -## Implements Python name lookup via dot indexing. -## @enddeftypefn - -function varargout = subsref (x, idx) - - if (nargin != 2) - print_usage (); - endif - - if (! isa (x, "py")) - error ("py: invalid call to subsref"); - endif - - if (isempty (idx) || ! isstruct (idx)) - error ("py: invalid call to subsref without indices"); - endif - - type = idx(1).type; - subs = idx(1).subs; - - if (type != ".") - error ("py: invalid indexing type"); - endif - - if (type == "." && ((numel (idx) == 1) || (idx(2).type != "."))) - try - y = pyeval (subs); - catch - y = pycall ("__import__", subs); - end_try_catch - else - y = pycall ("__import__", subs); - endif - - if (numel (idx) > 1) - y = subsref (y, idx(2:end)); - endif - - ## If the *last* indexing operation is ".name", and the object returned - ## is a Python callable, then call it with no arguments to be compatible - ## with how Octave functions are evaluated. - if (idx(end).type == ".") - if (isa (y, "py.collections.Callable")) - y = pycall (y); - endif - endif - - if (nargout > 0 || ! __py_is_none__ (y)) - varargout{1} = y; - endif - -endfunction diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/cell.m --- a/@pyobject/cell.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,102 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## Copyright (C) 2016 Mike Miller -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject cell (@var{x}) -## Convert a Python list or other object implementing the Sequence protocol -## to a cell array. -## -## For example, by default Python lists are not automatically -## converted into native Octave objects: -## @example -## @group -## L = pyeval ("[10.0, 20.0, 'hello']") -## @result{} L = [Python object of type list] -## -## [10.0, 20.0, 'hello'] -## @end group -## @end example -## -## However, we can convert the list to a cell array: -## @example -## @group -## @c FIXME: display of cell array in flux: https://savannah.gnu.org/bugs/?50756 -## @c doctest: +XFAIL -## C = cell (L) -## @result{} C = -## @{ -## [1,1] = 10 -## [1,2] = 20 -## [1,3] = [Python object of type str] -## -## hello -## @} -## @end group -## @end example -## -## The conversion is not recursive, in the following sense: -## @example -## @group -## @c FIXME: display of cell array in flux: https://savannah.gnu.org/bugs/?50756 -## @c doctest: +XFAIL -## L = pyeval ("[10.0, 20.0, [33.0, 44.0], 50.0]"); -## C = cell (L) -## @result{} C = -## @{ -## [1,1] = 10 -## [1,2] = 20 -## [1,3] = [Python object of type list] -## -## [33.0, 44.0] -## -## [1,4] = 50 -## @} -## @end group -## @end example -## -## @seealso{cell2mat} -## @end defmethod - - -function c = cell (x) - ## FIXME: when subsref returns the right number of output args, this can - ## simply be "c = {x{:}}" - n = length (x); - c = cell (1, n); - if (n > 0) - [c{:}] = subsref (x, struct ("type", "{}", "subs", {{":"}})); - endif -endfunction - - -%!assert (cell (pyeval ("[]")), cell (1, 0)) -%!assert (cell (pyeval ("[1.]")), {1}) -%!assert (cell (pyeval ("[1., 2., 3.]")), {1, 2, 3}) -%!assert (cell (pyeval ("(1., 2., 3.)")), {1, 2, 3}) -%!assert (cellfun (@char, cell (pyobject ("asdf")), "uniformoutput", false), {"a", "s", "d", "f"}) - -%!test -%! c = cell (pyeval ("range(10)")); -%! c = cellfun (@(x) eval ("double (x)"), c, "uniformoutput", false); -%! assert (c, num2cell (0:9)) - -%!error cell (pyobject ()) -%!error cell (pyeval ("None")) -%!error cell (pyobject (1)) diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/char.m --- a/@pyobject/char.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,39 +0,0 @@ -## Copyright (C) 2016 Mike Miller -## -## This file is part of Pytave. -## -## Pytave is free software; you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation; either version 3 of the License, or (at your -## option) any later version. -## -## Pytave is distributed in the hope that it will be useful, but WITHOUT -## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -## for more details. -## -## You should have received a copy of the GNU General Public License -## along with Pytave; see the file COPYING. If not, see -## . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject char (@var{x}) -## Conversion method to string. -## -## Example: -## @example -## @group -## s = pyobject ("hello world"); -## char (s) -## @result{} hello world -## @end group -## @end example -## @seealso{@@pyobject/disp} -## @end defmethod - -function s = char (x) - - s = __py_string_value__ (x); - -endfunction diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/display.m --- a/@pyobject/display.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject display (@var{x}) -## Custom display for pyobjects. -## -## Example: -## @example -## @group -## pyexec ("import sys") -## sysmodule = pyeval ("sys") -## @result{} sysmodule = [Python object of type module] -## -## -## -## @end group -## @end example -## -## @seealso{@@pyobject/char, @@pyobject/disp} -## @end defmethod - - -function display (x) - - try - [~, spacing] = format (); - loose = strcmp (spacing, "loose"); - catch - loose = ! __compactformat__ (); - end_try_catch - - printf ("%s = [Python object of type %s]\n", inputname (1), __py_class_name__ (x)); - s = char (x); - s = make_indented (s); - if (loose), printf ("\n"); endif - disp (s) - if (loose), printf ("\n"); endif - -endfunction - - -function s = make_indented (s, n) - if (nargin == 1) - n = 2; - endif - pad = char (double (" ") * ones (1,n)); - s = strrep (s, "\n", ["\n" pad]); - s = [pad s]; # first line -endfunction diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/dummy.m --- a/@pyobject/dummy.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,167 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject dummy (@var{x}) -## Does nothing, stores doctests and other misc docs for now. -## -## -## Some simple Python objects are converted to equivalent Octave values: -## @example -## @group -## pyeval ("6.0") -## @result{} ans = 6 -## @end group -## @end example -## -## To ensure the return value is a @@pyobject, it can be cast: -## @example -## @group -## g = pyobject (int32 (6)) -## @result{} g = [Python object of type int] -## -## 6 -## -## sort (methods (g)) -## @result{} ans = -## @{ -## [1,1] = bit_length -## ... -## @} -## -## sort (fieldnames (g)) -## @result{} ans = -## @{ -## [1,1] = denominator -## [2,1] = imag -## [3,1] = numerator -## [4,1] = real -## @} -## -## double (g.numerator) -## @result{} ans = 6 -## double (g.denominator) -## @result{} ans = 1 -## @end group -## @end example -## -## -## You can delete an object in Python and it will persist: -## @example -## @group -## pyexec ("d = dict(two=2)") -## x = pyeval ("d") -## @result{} x = [Python object of type dict] -## @{'two': 2@} -## -## # oops, overwrote d in Python: -## pyexec ("d = 42") -## -## # but have no fear, we still have a reference to it: -## x -## @result{} x = [Python object of type dict] -## @{'two': 2@} -## @end group -## @end example -## -## We can accesss ``callables'' (methods) of objects: -## @example -## @group -## double (x.pop ("two")) -## @result{} ans = 2 -## @end group -## @end example -## And note this has changed the Python dict @code{x}: -## @example -## @group -## x -## @result{} x = [Python object of type dict] -## @{@} -## @end group -## @end example -## -## -## @code{pyeval} returns a @@pyobject for things it cannot convert to -## Octave-native objects: -## @example -## @group -## pyexec ("import sys") -## sysmodule = pyeval ("sys") -## @result{} sysmodule = [Python object of type module] -## -## @end group -## @end example -## -## After you have the object, you can access its properties: -## @example -## @group -## sysmodule.version -## @result{} ans = ... -## @end group -## @end example -## -## -## A Python list is returned as a @@pyobject: -## @example -## @group -## L = pyeval ("[42.0, 'hello', sys]") -## @result{} L = [Python object of type list] -## [42.0, 'hello', ] -## @end group -## @end example -## -## Elements of the list can be accessed directly -## @example -## @group -## L@{1@} -## @result{} ans = 42 -## @end group -## @end example -## or if needed, the list can be converted to a cell array: -## @example -## @group -## @c FIXME: display of cell array in flux: https://savannah.gnu.org/bugs/?50756 -## @c doctest: +XFAIL -## cell (L) -## @result{} ans = -## @{ -## [1,1] = 42 -## [1,2] = [Python object of type str] -## hello -## [1,3] = [Python object of type module] -## -## @} -## @end group -## @end example -## -## A @@pyobject can be passed back to Python. This does not make -## a copy but rather a reference to the original object. -## For example: -## @example -## @group -## char (pycall ("repr", sysmodule)) -## @result{} -## @end group -## @end example -## -## @seealso{pyobject} -## @end defmethod - -function dummy (x) -endfunction diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/fieldnames.m --- a/@pyobject/fieldnames.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,82 +0,0 @@ -## Copyright (C) 2016 Mike Miller -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject fieldnames (@var{x}) -## List the properties of a Python object. -## -## Returns a cell array of strings containing the names of the properties -## of @var{x}. -## -## Example: -## @example -## @group -## pyexec ("import sys") -## sys = pyeval ("sys"); -## fieldnames (sys) -## @result{} ans = -## @{ -## [1,1] = ... -## [2,1] = ... -## ... = path -## ... = version -## ... -## @} -## @end group -## @end example -## -## @seealso{fieldnames, @@pyobject/methods} -## @end defmethod - - -function names = fieldnames (x) - - cmd = pyeval (["lambda x: [a for a in dir(x)" ... - " if not callable(getattr(x, a))" ... - " and not isinstance(getattr(x, a), __import__('types').ModuleType)" ... - " and not a.startswith('_')]"]); - - names_obj = pycall (cmd, x); - names = cellfun (@char, cell (names_obj), "uniformoutput", false); - names = names(:); - -endfunction - - -%!test -%! sys = pycall ("__import__", "sys"); -%! lst = fieldnames (sys); -%! assert (iscell (lst)) -%! assert (length (lst) >= 32) -%! assert (any (strcmp (lst, "path"))) -%! assert (any (strcmp (lst, "prefix"))) -%! assert (any (strcmp (lst, "stderr"))) -%! assert (any (strcmp (lst, "stdin"))) -%! assert (any (strcmp (lst, "stdout"))) -%! assert (any (strcmp (lst, "version"))) - -%!test -%! lst = fieldnames (pyeval ("__builtins__")); -%! assert (any (strcmp (lst, "False"))) -%! assert (any (strcmp (lst, "None"))) -%! assert (any (strcmp (lst, "True"))) - -%!assert (fieldnames (pyeval ("object()")), cell (0, 1)) -%!assert (fieldnames (pyeval ("{}")), cell (0, 1)) -%!assert (ismember ("denominator", fieldnames (pycall ("fractions.Fraction")))) diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/methods.m --- a/@pyobject/methods.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,142 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## Copyright (C) 2017 NVS Abhilash -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defmethod @@pyobject methods (@var{x}) -## @defmethodx @@pyobject methods (@var{x}, "-all") -## List the properties/callables of a Python object. -## -## Returns a cell array of strings, the names of the ``callables'' -## of @var{x}. -## -## If provided with an option @qcode{"-all"}, private methods are also included. -## -## Example: -## @example -## @group -## pyexec ("import os") -## os = pyeval ("os"); -## methods (os) -## @print{} Methods for Python module 'os': -## @print{} ... -## @print{} chdir ... -## @print{} ... -## x = methods (os) -## @result{} x = -## @{ -## [1,1] = ... -## [2,1] = ... -## ... = chdir -## ... = getenv -## ... -## @} -## @end group -## @end example -## -## To get the properties (non-callables) of an object, -## @pxref{@@pyobject/fieldnames}. -## -## Note that if you instead want the methods implemented by -## the Octave class @code{@@pyobject}, you can always do: -## @example -## @group -## methods pyobject -## @print{} Methods for class pyobject: -## @print{} ... display ... -## @comment this doctest may need updating as we add methods -## @end group -## @end example -## -## @seealso{methods, @@pyobject/fieldnames} -## @end defmethod - - -function mtds = methods (x, option) - - if (nargin < 1 || nargin > 2) - print_usage (); - endif - - show_all = false; - if (nargin == 2) - if (ischar (option)) - switch (tolower (option)) - case "-all" - show_all = true; - otherwise - warning ("methods: unrecognized OPTION '%s'", option); - endswitch - else - error ("methods: OPTION must be a string"); - endif - endif - - query_end = ""; - if (! show_all) - query_end = "and not a.startswith('_')"; - endif - - query = sprintf (["lambda x: [a for a in dir(x)" ... - " if callable(getattr(x, a)) %s]"], query_end); - - cmd = pyeval (query); - - mtds_list_obj = pycall (cmd, x); - - mtds_list = cellfun (@char, cell (mtds_list_obj), "uniformoutput", false); - - if (nargout == 0) - if (isa (x, "py.types.ModuleType")) - modulename = char (pycall ("getattr", x, "__name__")); - printf ("Methods for Python module '%s':\n", modulename); - else - printf ("Methods for Python class '%s':\n", __py_class_name__ (x)); - endif - disp (list_in_columns (mtds_list)); - else - mtds = mtds_list(:); - endif - -endfunction - - -%!test -%! sys = pycall ("__import__", "sys"); -%! m = methods (sys); -%! assert (iscellstr (m)) -%! assert (any (strcmp (m, "exit"))) - -%!test -%! os = pycall ("__import__", "os"); -%! m = methods (os); -%! assert (iscellstr (m)) -%! assert (any (strcmp (m, "chdir"))) -%! assert (any (strcmp (m, "getcwd"))) -%! assert (any (strcmp (m, "getenv"))) -%! assert (any (strcmp (m, "getpid"))) - -%!assert (methods (pyeval ("object()")), cell (0, 1)) -%!assert (ismember ("append", methods (pyeval ("[]")))) -%!assert (ismember ("keys", methods (pyeval ("{}")))) - -%!assert (! ismember ("__reversed__", methods (pyeval ("[]")))) -%!assert (ismember ("__reversed__", methods (pyeval ("[]"), "-all"))) -%!assert (! ismember ("__contains__", methods (pyeval ("{}")))) -%!assert (ismember ("__contains__", methods (pyeval ("{}"), "-all"))) diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/pyobject.m --- a/@pyobject/pyobject.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,426 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defun pyobject (@var{s}) -## Wrap a Python object. -## -## TODO: where/how to document classdef classes? -## -## @seealso{pyexec, pyeval} -## @end defun - - -classdef pyobject < handle - properties - m_id - endproperties - - - methods - function obj = pyobject (x, id) - if (nargin == 0) - obj = pyeval ("None"); - elseif (nargin == 1) - ## Convert the input to a pyobject - if (isa (x, "pyobject")) - obj = x; - else - obj.m_id = __py_objstore_put__ (x); - endif - elseif (nargin == 2) - ## The actual constructor. Nicer to split this off to static method - ## like `pyobject.new` but I don't know how to call from pycall.cc. - ## Warning: not intended for casual use: you must also insert the - ## object into the Python object store with key `id`. - obj.m_id = id; - else - error ("pyobject: unexpected input to the constructor") - endif - endfunction - - function delete (x) - # Called on clear of the last reference---for subclasses of - # handle; not called at all for "value classes". - # - # FIXME: #46497 this is never called! - # Workaround: call @code{delete(x)} right before @code{clear x}. But - # be careful, @code{x} needs to be the last reference: don't do this: - # @example - # d = pyobject (...); - # d2 = d; - # delete (d) - # clear d - # d2 - # @print{} ... KeyError ... - # @end example - - #disp ("delete") - - __py_objstore_del__ (x.m_id); - endfunction - - # methods defined in external files - char (x) - dummy (x) - display (x) - subsref (x, idx) - - function r = id (x); - r = x.m_id; - endfunction - - function varargout = disp (x) - s = char (x); - if (nargout == 0) - disp (s) - else - varargout = {s}; - endif - endfunction - - function s = class (x) - s = __py_class_name__ (x); - s = sprintf ("py.%s", s); - endfunction - - function y = double (x) - if (isa (x, "py.array.array")) - c = cell (x); - y = cellfun (@(t) eval ("double (t)"), c); - else - y = pycall ("float", x); - endif - endfunction - - function y = single (x) - y = single (double (x)); - endfunction - - function y = int8 (x) - y = int8 (__py_int64_scalar_value__ (x)); - endfunction - - function y = int16 (x) - y = int16 (__py_int64_scalar_value__ (x)); - endfunction - - function y = int32 (x) - y = int32 (__py_int64_scalar_value__ (x)); - endfunction - - function y = int64 (x) - y = __py_int64_scalar_value__ (x); - endfunction - - function y = uint8 (x) - y = uint8 (__py_uint64_scalar_value__ (x)); - endfunction - - function y = uint16 (x) - y = uint16 (__py_uint64_scalar_value__ (x)); - endfunction - - function y = uint32 (x) - y = uint32 (__py_uint64_scalar_value__ (x)); - endfunction - - function y = uint64 (x) - y = __py_uint64_scalar_value__ (x); - endfunction - - function y = isa (x, typestr) - assert (nargin == 2); - assert (ischar (typestr) || iscellstr (typestr)); - - if (ischar (typestr)) - typestr = { typestr }; - endif - - y = false (size (typestr)); - - for i = 1:numel (typestr) - if ((numel (typestr{i}) > 3) && (typestr{i}(1:3) == "py.")) - y(i) = __py_isinstance__ (x, typestr{i}); - else - y(i) = builtin ("isa", x, typestr{i}); - endif - endfor - endfunction - - function y = struct (x) - y = __py_struct_from_dict__ (x); - endfunction - - function vargout = help (x) - idx = struct ("type", ".", "subs", "__doc__"); - s = subsref (x, idx); - if (nargout == 0) - disp (s) - else - vargout = {s}; - endif - endfunction - - function len = length (x) - try - len = double (pycall ("len", x)); - catch - len = 1; - end_try_catch - endfunction - - - function [n, varargout] = size (x, d) - assert (nargin <= 2) - try - idx = struct ("type", ".", "subs", "shape"); - sz = subsref (x, idx); - sz = cellfun (@(x) eval ("double (x)"), cell (sz)); - catch - ## if it had no shape, make it a row vector - sz = [1 length(x)]; - end_try_catch - - ## simplest case - if (nargout <= 1 && nargin == 1) - n = sz; - return - endif - - ## quirk: pad extra dimensions with ones - if (nargin < 2) - d = 1; - endif - sz(end+1:max (d,nargout-end)) = 1; - - if (nargin > 1) - assert (nargout <= 1) - n = sz(d); - return - endif - - ## multiple outputs - n = sz(1); - for i = 2:(nargout-1) - varargout{i-1} = sz(i); - endfor - ## last is product of all remaining - varargout{nargout-1} = prod (sz(nargout:end)); - endfunction - - function n = ndims (x) - assert (nargin == 1) - n = length (size (x)); - endfunction - - function r = end (x, index_pos, num_indices) - assert (nargin == 3) - assert (isscalar (index_pos)) - if (num_indices == 1) - r = prod (size (x)); - else - r = size (x, index_pos); - endif - endfunction - - function res = isequal (varargin) - assert (nargin >= 2) - res = all (strcmp ("pyobject", cellfun ("class", varargin, "uniformoutput", false))); - for i = 2:nargin - if (! res) - return; - endif - res = res && pycall("bool", pycall ("operator.eq", varargin{1}, varargin{i})); - endfor - endfunction - endmethods -endclassdef - - -%!test -%! pyexec ("import sys") -%! A = pyeval ("sys"); -%! assert (isa (A, "pyobject")) - -%!test -%! pyobj = pyeval ("{1:2, 2:3, 3:4}"); -%! assert (isa (pyobj, "pyobject")) -%! assert (length (pyobj), 3) - -%!test -%! pyexec ("import sys"); -%! pyobj = pyeval ("sys"); -%! assert (length (pyobj), 1) - -%!assert (size (pyeval ("[10, 20, 30]")), [1 3]) -%!assert (size (pyeval ("[10, 20, 30]"), 1), 1) -%!assert (size (pyeval ("[10, 20, 30]"), 2), 3) -%!assert (size (pyeval ("[10, 20, 30]"), 3), 1) - -%!test -%! L = pyeval ("[10, 20, 30]"); -%! a = size (L); -%! assert (a, [1, 3]) -%! [a b] = size (L); -%! assert ([a b], [1 3]) -%! [a b c] = size (L); -%! assert ([a b c], [1 3 1]) - -%!assert (numel (pyeval ("[10, 20, 30]")), 1) - -%!test -%! L = pyeval ("[10, 20, 30]"); -%! assert (double (L{end}), 30) -%! assert (double (L{end-1}), 20) - -%!test -%! % ensure "end" works for iterables that are not lists -%! myrange = pyeval ( ... -%! "range if __import__('sys').hexversion >= 0x03000000 else xrange"); -%! R = pycall (myrange, int32 (5), int32 (10), int32 (2)); -%! assert (double (R{end}), 9) - -%!shared a -%! pyexec ("class _myclass(): shape = (3, 4, 5)") -%! a = pyeval ("_myclass()"); -%!assert (size (a), [3 4 5]) -%!assert (size (a, 3), 5) -%!test -%! s = size (a); -%! assert (s, [3 4 5]) -%!test -%! [n m] = size (a); -%! assert ([n m], [3 20]) -%!test -%! [n m o] = size (a); -%! assert ([n m o], [3 4 5]) -%!test -%! [n m o p] = size (a); -%! assert ([n m o p], [3 4 5 1]) -%!assert (numel (a), 1) -%!assert (ndims (a), 3) -%!shared - -## Test conversion of scalar struct into a Python dict -%!shared s1 -%! s1.name = "Octave"; -%! s1.value = 42; -%! s1.counts = {1, 2, 3}; -%! s1.ok = true; -%!assert (isa (pyobject (s1), "pyobject")) -%!assert (class (pyobject (s1)), "py.dict") -%!assert (char (pyobject (s1){"name"}), "Octave") -%!assert (pyobject (s1){"value"}, 42) -%!assert (pyobject (s1){"ok"}, true) - -%!error pyobject (struct ("a", {})) -%!error pyobject (struct ("a", {1, 2})) - -%!assert (char (pyeval ("None")), "None") -%!assert (char (pyeval ("'this is a string'")), "this is a string") -%!assert (char (pyeval ("[1, 2, 3, 4, 5]")), "[1, 2, 3, 4, 5]") -%!assert (char (pyeval ("(1, 2, 3, 4, 5)")), "(1, 2, 3, 4, 5)") -%!assert (char (pyeval ("__import__('sys')")), "") - -%!assert (isa (pyobject (), "pyobject")) -%!assert (isa (pyobject ("a string"), "pyobject")) -%!assert (isa (pyobject (42.2), "pyobject")) -%!assert (isa (pyobject (int32 (42)), "pyobject")) -%!assert (isa (pyobject (pyobject ()), "pyobject")) - -%!assert (class (pyeval ("{}")), "py.dict") -%!assert (class (pyeval ("[]")), "py.list") -%!assert (class (pyeval ("()")), "py.tuple") -%!assert (class (pyeval ("set()")), "py.set") -%!assert (class (pyeval ("None")), "py.NoneType") -%!assert (class (pyeval ("2.5")), "double") - -## Test conversion method pyobject.double -%!assert (double (pyobject (2.5)), 2.5) -%!assert (double (pyobject (42)), 42) -%!assert (double (pyobject ("42")), 42) -%!assert (double (pyobject (false)), 0) -%!assert (double (pycall ("array.array", "d", {31, 32, 33, 34})), [31, 32, 33, 34]) - -%!error double (pyobject ("this is not a number")) -%!error double (pyobject ()) -%!error double (pyeval ("[1, 2, 3]")) - -## Test class type check method pyobject.isa -%!assert (isa (pyobject (), "handle")) -%!assert (isa (pyobject (), "pyobject")) -%!assert (! isa (pyobject (), "py.None")) -%!assert (isa (pyobject (0), "handle")) -%!assert (isa (pyobject (0), "pyobject")) -%!assert (isa (pyobject (0), "py.float")) -%!assert (isa (pyobject (int32 (0)), "py.int")) -%!assert (isa (pyobject (true), "py.bool")) -%!assert (isa (pyobject ("a string"), "py.str")) -%!assert (isa (pyobject (struct ()), "py.dict")) -%!assert (isa (pyobject (cell ()), "py.tuple")) -%!assert (isa (pyobject ([]), "py.array.array")) -%!assert (isa (pyobject ([1, 2, 3, 4]), "py.array.array")) -%!assert (isa (pyobject ([1; 2; 3; 4]), "py.array.array")) -%!assert (all (isa (pyobject (0), {"pyobject", "py.float", "py.numbers.Number"}))) - -## Test conversion method pyobject.int64 -%!assert (int64 (pyobject (int8 (0))), int64 (0)) -%!assert (int64 (pyobject (int64 (42))), int64 (42)) -%!assert (int64 (pyobject (intmax ("int64"))), intmax ("int64")) -%!assert (int64 (pyobject (intmin ("int64"))), intmin ("int64")) -%!assert (int64 (pycall ("int", 1e100)), intmax ("int64")) -%!assert (int64 (pycall ("int", -1e100)), intmin ("int64")) - -## Test conversion method pyobject.struct -%!assert (struct (pycall ("dict")), struct ()) -%!assert (struct (pyobject (struct ())), struct ()) -%!test -%! a = struct ("a", 1, "b", 2, "three", 3); -%! b = pyobject (a); -%! c = struct (b); -%! assert (c, a) -%!test -%! a = struct ("a", 1, "b", 2, "three", 3); -%! b = pycall ("dict", pyargs ("a", 1, "b", 2, "three", 3)); -%! c = struct (b); -%! assert (c, a) - -%!error struct (pyeval ("{1:2, 3:4}")); -%!error struct (pyobject ("this is not a dict")) -%!error struct (pyobject ({1, 2, 3})) -%!error struct (pyobject ()) - -## Octave fails to resolve function overloads via function handles -%!xtest -%! fn = @double; -%! x = pyobject (int64 (42)); -%! assert (fn (x), double (x)) - -%!error (isequal (pyobject ())) -%!assert (! isequal (pyobject (1.2), 1.2)) -%!assert (isequal (pyobject ("a string"), pyobject ("a string"))) -%!assert (isequal (pyeval ("None"), pyeval ("None"))) -%!assert (! isequal (pyeval ("None"), pyeval ("None"), pyobject (10))) -%!assert (isequal (pyobject (10), pyobject (10.0), pyobject (int8 (10)))) - -%!test -%! A = pyeval ("[1, 2, 3]"); -%! B = pycall ("list", {1, 2, 3}); -%! assert (isequal (A, B)) diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/subsasgn.m --- a/@pyobject/subsasgn.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,132 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## -## This file is part of Pytave. -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defop Method @@pyobject subsasgn (@var{x}, @var{idx}, @var{rhs}) -## @defopx Operator @@pyobject {@var{x}.@var{property} =} {@var{rhs}} -## @defopx Operator @@pyobject {@var{x}@{@var{i}@} =} {@var{rhs}} -## @defopx Operator @@pyobject {@var{x}@{@var{i}, @var{j}, @dots{}@} =} {@var{rhs}} -## @defopx Operator @@pyobject {@var{x}@{@var{a}@} =} {@var{rhs}} -## Indexed assignment to Python objects. -## -## @seealso{@@pyobject/subsref} -## @end defop - -function r = subsasgn(x, idx, rhs) - - if (nargin != 3) - print_usage (); - endif - - ## If rhs is a pyobject but x is not, dispatch to the builtin subsasgn - if (! isa (x, "pyobject")) - r = builtin ("subsasgn", x, idx, rhs); - return; - endif - - switch idx.type - case "." - assert (ischar (idx.subs)) - pycall ("setattr", x, idx.subs, rhs); - r = x; - - case "{}" - ## XXX: doesn't support slices or anything like that yet - - ## Subtract one from index: do this for lists, numpy arrays, etc - x_is_sequence = any (isa (x, {"py.collections.Sequence", ... - "py.numpy.ndarray"})); - for i = 1:length (idx.subs) - j = idx.subs{i}; - if (x_is_sequence && isindex (j) && isnumeric (j)) - idx.subs{i} = cast (j, class (sizemax ())) - 1; - endif - endfor - - if (isscalar (idx.subs)) - ind = idx.subs{1}; - else - ind = pycall ("tuple", idx.subs); - endif - - pycall ("operator.setitem", x, ind, rhs); - r = x; - - otherwise - idx - rhs - error ("@pyobject/subsasgn: not implemented") - endswitch -endfunction - - -%!test -%! pyexec ("class MyClass: a = 1") -%! t = pyeval ("MyClass()"); -%! t.b = 6; -%! assert (t.b, 6) - -%!test -%! % list indexing -%! L = pyeval ("[10., 20.]"); -%! L{2} = "Octave"; -%! assert (length (L) == 2) -%! assert (L{1}, 10) -%! assert (char (L{2}), "Octave") - -%!test -%! % dict assignment, adding new keys -%! d = pyeval ("dict()"); -%! d{"a"} = 3; -%! d{"b"} = 4; -%! assert (d{"a"}, 3) -%! assert (d{"b"}, 4) - -%!test -%! % dict assignment, update existing key -%! d = pyeval ("{'a':1}"); -%! d{"a"} = 3; -%! assert (d{"a"}, 3) - -%!test -%! % dict assignment, other keys (e.g., Issue #10). -%! d = pyeval ("dict()"); -%! d{"5"} = 10; -%! d{5.5} = 11; -%! d{5} = 12; -%! assert (d{"5"}, 10) -%! assert (d{5.5}, 11) -%! assert (d{5}, 12) - -## Test that depends on implicit creation of NumPy arrays, do we want this? -%!xtest -%! % 2D array indexing -%! A = pyobject ([1.1 2 3; 4 5 6]); -%! A{1, 1} = 10; -%! A{1, 3} = 30; -%! A{2, 1} = 40; -%! assert (A{1, 1}, 10) -%! assert (A{1, 3}, 30) -%! assert (A{2, 1}, 40) -%! assert (A{2, 2}, 5) - -## Test of string key assignment, fails in the general case -%!xtest -%! d = pyobject (struct ()); -%! d{"value"} = 1; diff -r 3af3665348a1 -r c8543d9a4bff @pyobject/subsref.m --- a/@pyobject/subsref.m Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,293 +0,0 @@ -## Copyright (C) 2016 Colin B. Macdonald -## -## This file is part of Pytave -## -## Pytave is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published -## by the Free Software Foundation; either version 3 of the License, -## or (at your option) any later version. -## -## This software is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty -## of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -## the GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public -## License along with this software; see the file COPYING. -## If not, see . - -## -*- texinfo -*- -## @documentencoding UTF-8 -## @defop Method @@pyobject subsref (@var{x}, @var{idx}) -## @defopx Operator @@pyobject {@var{x}.@var{property}} {} -## @defopx Operator @@pyobject {@var{x}.@var{method}(@var{a}, @dots{})} {} -## @defopx Operator @@pyobject {@var{x}@{@var{i}@}} {} -## @defopx Operator @@pyobject {@var{x}@{@var{i}, @var{j}, @dots{}@}} {} -## @defopx Operator @@pyobject {@var{x}(@var{a})} {} -## @defopx Operator @@pyobject {@var{x}(@var{a}, @var{b}, @dots{})} {} -## Call methods and access properties of a Python object. -## -## -## @seealso{@@pyobject/subsasgn} -## @end defop - - -function varargout = subsref (x, idx) - - t = idx(1); - switch (t.type) - case "." - assert (ischar (t.subs)) - r = pycall ("getattr", x, t.subs); - - case "()" - ## Determine the types and protocols that we are able to index into - x_is_callable = __py_isinstance__ (x, "py.collections.Callable"); - x_is_sequence = __py_isinstance__ (x, "py.collections.Sequence") ... - | __py_isinstance__ (x, "py.array.array") ... - | __py_isinstance__ (x, "py.numpy.ndarray"); - - if (! (x_is_callable || x_is_sequence)) - error ("subsref: cannot index Python object, not sequence or callable"); - endif - - if (x_is_sequence) - error ("subsref: slice indexing of Python objects not yet implemented"); - endif - - r = pycall (x, t.subs{:}); - - case "{}" - ## Determine the types and protocols that we are able to index into - x_is_mapping = __py_isinstance__ (x, "py.collections.Mapping"); - x_is_sequence = __py_isinstance__ (x, "py.collections.Sequence") ... - | __py_isinstance__ (x, "py.array.array") ... - | __py_isinstance__ (x, "py.numpy.ndarray"); - - if (! (x_is_mapping || x_is_sequence)) - error ("subsref: cannot index Python object, not sequence or mapping"); - endif - - ## Subtract one from index: do this for lists, arrays, numpy arrays, etc - for i = 1:length (t.subs) - j = t.subs{i}; - if (isindex (j) && isnumeric (j) && x_is_sequence) - t.subs{i} = cast (j, class (sizemax ())) - 1; - endif - endfor - - if (ischar (t.subs{1}) && strcmp (t.subs{1}, ":")) - if (x_is_mapping) - ind = ":"; - else - ind = int32 ([1:length(x)] - 1); - endif - elseif (isscalar (t.subs)) - ind = t.subs{1}; - else - ind = pycall ("tuple", t.subs); - endif - - if (isempty (ind) && x_is_sequence) - r = pyobject (); - elseif (isnumeric (ind) && length (ind) > 1) - r = {}; - for k = 1:length (ind) - r(end+1) = pycall ("operator.getitem", x, ind(k)); - endfor - else - r = pycall ("operator.getitem", x, ind); - endif - - otherwise - t - error ("@pyobject/subsref: not implemented") - endswitch - - ## deal with additional indexing (might be recursive) - if (length (idx) > 1) - r = subsref (r, idx(2:end)); - endif - - ## unpack results, ensure "ans" works (see also pycall) - if (nargout == 0 && ! __py_is_none__ (r)) - varargout{1} = r; - elseif (nargout == 1) - varargout{1} = r; - elseif (nargout >= 2) - assert (length (r) == nargout, ... - "pyobject/subsref: number of outputs must match") - [varargout{1:nargout}] = subsref (r, struct ("type", "{}", "subs", {{1:nargout}})); - endif -endfunction - - -%!test -%! % list indexing -%! L = pyeval ("[10., 20.]"); -%! assert (L{1}, 10) -%! assert (L{2}, 20) - -%!test -%! % list indexing, slice -%! L = pyeval ("[10., 20., [30., 40.]]"); -%! L2 = L{:}; -%! assert (L2{1}, 10) -%! assert (L2{2}, 20) -%! assert (L2{3}{1}, 30) -%! assert (L2{3}{2}, 40) - -%!test -%! % list indexing, nested list -%! L = pyeval ("[1., 2., [10., 11., 12.]]"); -%! assert (L{2}, 2) -%! assert (L{3}{1}, 10) -%! assert (L{3}{3}, 12) - -%!test -%! % list indexing, assign to vars -%! L = pyeval ("[1., 2., 'Octave']"); -%! [a, b, c] = L{:}; -%! assert (a, 1) -%! assert (b, 2) -%! assert (char (c), "Octave") - -## Test that depends on implicit creation of NumPy arrays, do we want this? -%!xtest -%! % 2D array indexing -%! A = pyobject ([1. 2.; 3. 4.]); -%! assert (A{1, 1}, 1) -%! assert (A{2, 1}, 3) -%! assert (A{1, 2}, 2) - -## Test element indexing on array.array types -%!test -%! a = pycall ("array.array", "d", {11, 12, 13, 14}); -%! assert (a{1}, 11) -%! assert (a{2}, 12) -%! assert (a{end}, 14) - -%!test -%! % dict: str key access -%! d = pyeval ("{'one':1., 5:5, 6:6}"); -%! assert (d{"one"}, 1) - -%!test -%! % dict: integer key access -%! d = pyeval ("{5:42., 6:42.}"); -%! assert (d{6}, 42) - -%!test -%! % dict: integer key should not subtract one -%! d = pyeval ("{5:40., 6:42.}"); -%! assert (d{6}, 42) - -%!test -%! % dict: floating point keys should work -%! d = pyeval ("{5.5:'ok'}"); -%! assert (char (d{5.5}), "ok") - -%!test -%! % dict: make sure key ":" doesn't break anything -%! d = pyeval ("{'a':1., ':':2.}"); -%! assert (d{'a'}, 1) -%! assert (d{':'}, 2) - -%!test -%! % method call with args -%! s = pyeval ("set({1, 2})"); -%! s.add (42) -%! assert (length (s) == 3) - -%!test -%! % get a callable -%! s = pyeval ("set({1, 2})"); -%! sa = s.add; -%! assert (isa (sa, "pyobject")) -%! % and then call it -%! sa (42) -%! assert (length (s) == 3) - -%!test -%! % callable can return something -%! s = pyeval ("set({1., 2.})"); -%! v = s.pop (); -%! assert (length (s) == 1) -%! assert (v == 1 || v == 2) - -%!test -%! % chain -%! pyexec ("import sys") -%! s = pyeval ("set({sys})"); -%! ver = s.pop ().version; -%! assert (isa (ver, "pyobject")) -%! assert (ischar (char (ver))) - -%!test -%! % don't set "ans" if no return value -%! s = pyeval ("set({1, 2})"); -%! sa = s.add; -%! clear ans -%! sa (42) -%! assert (! exist ("ans", "var")) - -%!test -%! % *do* set "ans" if return value -%! s = pyeval ("set({1, 2})"); -%! clear ans -%! s.pop (); -%! assert (exist ("ans", "var")) -%! assert (length (s) == 1) - -%!test -%! % multiple return values: can get all of them -%! f = pyeval ("lambda: (1, 2, 3)"); -%! a = f (); -%! assert (length (a) == 3) - -%!test -%! % multiple return values: separate them -%! f = pyeval ("lambda: (1., 2., 3.)"); -%! [a, b, c] = f (); -%! assert (a, 1) -%! assert (b, 2) -%! assert (c, 3) - -%!test -%! % multiple return values: set ans -%! f = pyeval ("lambda: (1, 2, 3)"); -%! f (); -%! assert (length (ans) == 3) - -%!test -%! % ensure None is returned if nargout > 0 -%! L = pyeval ("[1, None, 3]"); -%! a = L{2}; -%! assert (char (a), "None") - -## Test of multi-element indexing, fails to return correct number of output args -%!xtest -%! a = {1, 2, 3, 4, 5, 6}; -%! b = pyobject (a); -%! b{:}; -%! assert (ans, a{end}) - -%!xtest -%! a = {1, 2, 3, 4, 5, 6}; -%! b = pyobject (a); -%! c = {b{:}}; -%! assert (c, a) - -%!error -%! f = pyeval ("abs"); -%! f{1} - -%!error -%! % multiple return values: too many outputs -%! f = pyeval ("lambda: (1, 2)"); -%! [a, b, c] = f (); - -%!error -%! % multiple return values: not enough outputs -%! f = pyeval ("lambda: (1, 2, 3)"); -%! [a, b] = f (); diff -r 3af3665348a1 -r c8543d9a4bff CONTRIBUTORS.md --- a/CONTRIBUTORS.md Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,18 +0,0 @@ -Contributors -============ - -* Mike Miller -* Colin Macdonald -* Juan Pablo Carbajal -* Abhinav Tripathi -* NVS Abhilash -* Vijay Krishnavanshi - ---- - -Thanks to the authors of the original Pytave project, which served as -the origin and inspiration of this project: - -* David Grundberg -* Håkan Fors Nilsson -* Jaroslav Hájek diff -r 3af3665348a1 -r c8543d9a4bff COPYING --- a/COPYING Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - Copyright (C) - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff -r 3af3665348a1 -r c8543d9a4bff Doxyfile --- a/Doxyfile Thu Feb 22 15:55:15 2018 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,2434 +0,0 @@ -# Doxyfile 1.8.9.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = Pytave - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./doc - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note: For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = YES - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO, -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. If set to YES, local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO, only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = YES - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO, these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES, the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will -# append additional text to a page's title, such as Class Reference. If set to -# YES the compound reference will be hidden. -# The default value is: NO. - -HIDE_COMPOUND_REFERENCE= NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo -# list. This list is created by putting \todo commands in the documentation. -# The default value is: YES. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test -# list. This list is created by putting \test commands in the documentation. -# The default value is: YES. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if ... \endif and \cond -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES, the -# list will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# Configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag is used to specify the files and/or directories that contain -# documented source files. You may enter file names like myfile.cpp or -# directories like /usr/src/myproject. Separate the files or directories with -# spaces. -# Note: If this tag is empty the current directory is searched. - -INPUT = . - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. - -FILE_PATTERNS = *.c \ - *.cc \ - *.cxx \ - *.cpp \ - *.c++ \ - *.java \ - *.ii \ - *.ixx \ - *.ipp \ - *.i++ \ - *.inl \ - *.idl \ - *.ddl \ - *.odl \ - *.h \ - *.hh \ - *.hxx \ - *.hpp \ - *.h++ \ - *.cs \ - *.d \ - *.php \ - *.php4 \ - *.php5 \ - *.phtml \ - *.inc \ - *.m \ - *.markdown \ - *.md \ - *.mm \ - *.dox \ - *.py \ - *.f90 \ - *.f \ - *.for \ - *.tcl \ - *.vhd \ - *.vhdl \ - *.ucf \ - *.qsf \ - *.as \ - *.js - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or directories -# that contain example code fragments that are included (see the \include -# command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank all -# files are included. - -EXAMPLE_PATTERNS = * - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude commands -# irrespective of the value of the RECURSIVE tag. -# The default value is: NO. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or directories -# that contain images that are to be included in the documentation (see the -# \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# -# -# where is the value of the INPUT_FILTER tag, and is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - -# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page -# (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. - -USE_MDFILE_AS_MAINPAGE = - -#--------------------------------------------------------------------------- -# Configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will be -# generated. Documented entities will be cross-referenced with these sources. -# -# Note: To get rid of all source code in the generated output, make sure that -# also VERBATIM_HEADERS is set to NO. -# The default value is: NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = YES - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = YES - -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefore more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_DYNAMIC_SECTIONS = NO - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated -# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = YES - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use + S -# (what the is depends on the OS and browser, but it is typically -# , /