--- a/ChangeLog	Sat Feb 07 12:39:19 2009 -0500
+++ b/ChangeLog	Sun Feb 08 23:00:27 2009 -0500
@@ -1,3 +1,9 @@
+2009-02-08  John W. Eaton  <jwe@octave.org>
+
+	* install-octave.in: Delete.
+	* configure.in: Delete AC_CONFIG_COMMANDS macro that was used to
+	make install-octave executable.
+
 2009-02-07  John W. Eaton  <jwe@octave.org>
 
 	* octMakefile.in (all): Display $(prefix) in summary message.

--- a/configure.in	Sat Feb 07 12:39:19 2009 -0500
+++ b/configure.in	Sun Feb 08 23:00:27 2009 -0500
@@ -2087,8 +2087,6 @@
   libcruft/blas-xtra/Makefile libcruft/lapack-xtra/Makefile])
 AC_OUTPUT
 
-AC_CONFIG_COMMANDS([default-1],[[chmod +x install-octave]],[[]])
-
 ### Print a summary so that important information isn't missed.
 
 if test -z "$F77"; then

--- a/install-octave.in	Sat Feb 07 12:39:19 2009 -0500
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,323 +0,0 @@
-#!/bin/sh
-#
-# install-octave -- install script for binary distributions.
-#
-# John W. Eaton
-# jwe@bevo.che.wisc.edu
-# University of Wisconsin-Madison
-# Department of Chemical Engineering
-
-# Exit on any error.
-
-set -e
-
-SED=@SED@
-
-# get version
-version=`cat VERSION 2> /dev/null`
-
-if test -z "$version"
-then
-  cat <<EOF 
-install-octave: no version number!
-
-Are you sure you have a binary distribution of Octave?  If you are
-trying to install Octave from its sources, please read and follow
-the directions given in the file INSTALL.OCTAVE.
-EOF
-  exit 1
-fi
-
-# get host type
-canonical_host_type=`cat ARCH 2> /dev/null`
-
-if test -z "$canonical_host_type"
-then
-  cat <<EOF 
-install-octave: host archetecture not found!
-
-Are you sure you have a binary distribution of Octave?  If you are
-trying to install Octave from its sources, please read and follow
-the directions given in the file INSTALL.OCTAVE.
-EOF
-  exit 1
-fi
-
-# Check whether to use -n or \c to keep echo from printing a newline
-# character.  Stolen from autoconf, which borrowed the idea from dist 3.0.
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | $SED s/-n/xn/ | grep xn >/dev/null; then
-    echo_n=
-    echo_c='
-'
-  else
-    echo_n=-n
-    echo_c=
-  fi
-else
-  echo_n=
-  echo_c='\c'
-fi
-
-EXEEXT=@EXEEXT@
-SHLEXT=@SHLEXT@
-SHLEXT_VER=$SHLEXT.$version
-
-# ==================== Where To Install Things ====================
-
-# The default location for installation.  Everything is placed in
-# subdirectories of this directory.  The default values for many of
-# the variables below are expressed in terms of this one, so you may
-# not need to change them.  This defaults to /usr/local.
-prefix=@prefix@
-
-alt_dir=false
-if test $# -eq 1
-then
-  alt_dir=true
-  prefix=$1
-else
-  if test $# -gt 1
-  then
-    echo "usage: install-octave [prefix-directory]"
-    exit 1
-  fi
-fi
-
-# Like `prefix', but used for architecture-specific files.
-exec_prefix="$prefix"
-
-# Where to install Octave and other binaries that people will want to
-# run directly.
-bindir="$exec_prefix/bin"
-
-# Where to install architecture-independent data files.  ${fcnfiledir}
-# and ${localfcnfiledir} are subdirectories of this.
-datadir="$prefix/share"
-
-libdir="$exec_prefix/lib"
-
-# Where to install and expect libraries like libcruft.a and liboctave.a.
-octlibdir="$libdir/octave-$version"
-
-# Where to install and expect executable programs to be run by Octave
-# rather than directly by users.
-libexecdir="$exec_prefix/libexec"
-
-includedir="$prefix/include"
-
-# Where to install Octave's include files.  The default is
-# ${prefix}/include/octave-$version
-octincludedir=$includedir/octave-$version
-
-# Where to install Octave's man pages, and what extension they should
-# have.  The default is ${prefix}/man/man1
-mandir="$prefix/man/man1"
-manext="1"
-
-# Where to install and expect the info files describing Octave..
-infodir="$prefix/info"
-
-# The fill path to the default info file.
-infofile="$infodir/octave.info"
-
-# ==================== Octave-specific directories ====================
-
-# These variables hold the values Octave will actually use.  They are
-# based on the values of the standard Make variables above.
-
-# Where to install the function file distributed with
-# Octave.  This includes the Octave version, so that the
-# function files for different versions of Octave will install
-# themselves in separate directories.
-fcnfiledir="$datadir/octave/$version/m"
-
-# Directories Octave should search for function files specific
-# to this site (i.e. customizations), before consulting
-# ${fcnfiledir}.  This should be a colon-separated list of
-# directories.
-localfcnfiledir="$datadir/octave/site/m"
-localfcnfilepath="$localfcnfiledir//"
-
-# Where to put executables to be run by Octave rather than
-# the user.  This path usually includes the Octave version
-# and configuration name, so that multiple configurations
-# for multiple versions of Octave may be installed at once.
-archlibdir="$libexecdir/octave/$version/exec/$canonical_host_type"
-
-# Where to put executables to be run by Octave rather than by the
-# user that are specific to this site.
-localarchlibdir="$libexecdir/octave/site/exec/$canonical_host_type"
-
-# Where to put object files that will by dynamically loaded.
-# This path usually includes the Octave version and configuration
-# name, so that multiple configurations for multiple versions of
-# Octave may be installed at once. 
-octfiledir="$libexecdir/octave/$version/oct/$canonical_host_type"
-
-# Directories Octave should search for object files that will be
-# dynamically loaded and that are specific to this site
-# (i.e. customizations), before consulting ${octfiledir}.  This should
-# be a colon-separated list of directories.
-localoctfiledir="$libexecdir/octave/site/oct/$canonical_host_type"
-localoctfilepath="$localoctfiledir//"
-
-# Where Octave will search to find its function files.  Before
-# changing this, check to see if your purpose wouldn't
-# better be served by changing localfcnfilepath.  This
-# should be a colon-separated list of directories.
-fcnfilepath=".:$localoctfilepath:$localfcnfilepath:$octfiledir//:$fcnfiledir//"
-
-# Where Octave will search to find image files.es.
-imagedir="$datadir/octave/$version/imagelib"
-imagepath=".:$imagedir//"
-
-cat << EOF
-Installing octave in the following subdirectories of
-$prefix:
-
-            bindir: `echo $bindir | $SED "s,^$prefix/,,"`
-           datadir: `echo $datadir | $SED "s,^$prefix/,,"`
-            libdir: `echo $libdir | $SED "s,^$prefix/,,"`
-         octlibdir: `echo $octlibdir | $SED "s,^$prefix/,,"`
-        includedir: `echo $includedir | $SED "s,^$prefix/,,"`
-     octincludedir: `echo $octincludedir | $SED "s,^$prefix/,,"`
-            mandir: `echo $mandir | $SED "s,^$prefix/,,"`
-           infodir: `echo $infodir | $SED "s,^$prefix/,,"`
-        fcnfiledir: `echo $fcnfiledir | $SED "s,^$prefix/,,"`
-   localfcnfiledir: `echo $localfcnfiledir | $SED "s,^$prefix/,,"`
-        archlibdir: `echo $archlibdir | $SED "s,^$prefix/,,"`
-   localarchlibdir: `echo $localarchlibdir | $SED "s,^$prefix/,,"`
-        octfiledir: `echo $octfiledir | $SED "s,^$prefix/,,"`
-   localoctfiledir: `echo $localoctfiledir | $SED "s,^$prefix/,,"`
-          imagedir: `echo $imagedir | $SED "s,^$prefix/,,"`
-
-EOF
-
-echo $echo_n "Is this correct [y/N]? " $echo_c
-
-read ans
-
-case "$ans" in
-  y | Y | yes | YES)
-  ;;
-  *)
-    exit 1
-  ;;
-esac
-
-DIRS_TO_MAKE="$bindir $datadir $libdir $octlibdir $libexecdir \
-  $includedir $octincludedir $mandir $infodir $fcnfiledir \
-  $localfcnfiledir $archlibdir $localarchlibdir \
-  $octfiledir $localoctfiledir $imagedir"
-
-./mkinstalldirs $DIRS_TO_MAKE
-
-echo "installing octave-bug as $bindir/octave-bug"
-cp octave-bug $bindir/octave-bug
-chmod 755 $bindir/octave-bug
-
-echo "installing octave-config as $bindir/octave-config"
-cp octave-config $bindir/octave-config
-chmod 755 $bindir/octave-config
-
-if test -f LIBRARIES; then
-  echo "installing shared libraries in $octlibdir"
-  for f in `cat LIBRARIES`
-  do
-    file=`basename $f`
-    cp $f.$SHLEXT_VER $octlibdir/$file.$SHLEXT_VER
-    chmod 644 $octlibdir/$file.$SHLEXT_VER
-    ( cd $octlibdir
-      ln -s $file.$SHLEXT_VER $file.$SHLEXT )
-  done
-fi
-
-oct_files=`find . -name '*.oct' -print`
-if test -n "$oct_files"; then
-  echo "installing .oct files in $octfiledir"
-  for f in $oct_files
-  do
-    file=`basename $f`
-    cp $f $octfiledir/$file
-    chmod 755 $octfiledir/$file
-  done
-  if test -f src/links-to-make; then
-    cat src/links-to-make | while read src dest
-    do
-      if test -n "$src" && test -n "$dest"; then
-	( cd $octfiledir
-          ln $src $dest )
-      fi
-    done
-  fi
-fi
-
-echo "installing .m files in $fcnfiledir"
-( cd scripts
-  tar cf - . | ( cd $fcnfiledir ; tar xf - )
-  find $fcnfiledir -type f -print | xargs chmod 0644
-  find $fcnfiledir -name '*.img' -print | xargs rm -f )
-
-echo "installing image files in $imagedir"
-( cd scripts/image
-  cp *.img $imagedir
-  chmod 644 $imagedir/*.img )
-
-echo "creating ls-R file in $datadir/octave"
-ls -LR $datadir/octave > $datadir/octave/ls-R
-chmod 644 $datadir/octave/ls-R
-
-echo "creating ls-R file in $libexecdir/octave"
-ls -LR $libexecdir/octave > $libexecdir/octave/ls-R
-chmod 644 $libexecdir/octave/ls-R
-
-echo "installing info files in $infodir"
-for f in doc/interpreter/octave.info*
-do
-  file=`basename $f`
-  cp $f $infodir/$file
-  chmod 644 $infodir/$file
-done
-
-echo "installing man page in $mandir"
-cp doc/interpreter/octave.1 $mandir/octave.$manext
-chmod 644 $mandir/octave.$manext
-
-# Do this last, so that it won't be available if some other error
-# happens earlier.  Otherwise, people might try to run Octave with
-# an incomplete installation.
-
-if test "$prefix" = /usr/local
-then
-  echo "installing src/octave as $bindir/octave"
-  cp src/octave $bindir/octave
-  chmod 755 $bindir/octave
-else
-  echo "installing octave-sh as $bindir/octave"
-  $SED "s|@OCTAVE_HOME@|$prefix|; s|@LD_LIBRARY_PATH@|$octlibdir|" octave-sh \
-    > $bindir/octave
-  chmod 755 $bindir/octave
-
-  echo "installing src/octave as $bindir/octave.bin"
-  cp src/octave $bindir/octave.bin
-  chmod 755 $bindir/octave.bin
-fi
-
-case "$canonical_host_type" in
-  *-*-cygwin* | *-*-mingw*)
-    if $alt_dir; then
-      echo "*** You have specified an installation directory different"
-      echo "*** from the default.  For Octave to run properly, you must"
-      echo "*** set the environment variable OCTAVE_HOME to"
-      echo "***"
-      echo "***   $prefix"
-      echo "***"
-      echo "*** before starting Octave."
-    fi
-  ;;
-esac
-
-exit 0

--- a/scripts/ChangeLog	Sat Feb 07 12:39:19 2009 -0500
+++ b/scripts/ChangeLog	Sun Feb 08 23:00:27 2009 -0500
@@ -1,3 +1,8 @@
+2009-02-08  John W. Eaton  <jwe@octave.org>
+
+	* Makefile.in (install install-strip): Don't install ls-R file.
+	(uninstall): Don't uninstall ls-R file.
+
 2009-02-06  Jaroslav Hajek  <highegg@gmail.com>
 
 	* optimization/fsolve.m: Document support for complex holomorphic

--- a/scripts/Makefile.in	Sat Feb 07 12:39:19 2009 -0500
+++ b/scripts/Makefile.in	Sun Feb 08 23:00:27 2009 -0500
@@ -71,13 +71,6 @@
 .PHONY: install install-strip uninstall
 .PHONY: clean mostlyclean distclean maintainer-clean
 
-install install-strip::
-	ls -LR $(DESTDIR)$(datadir)/octave > $(DESTDIR)$(datadir)/octave/ls-R
-	ls -LR $(DESTDIR)$(libexecdir)/octave > $(DESTDIR)$(libexecdir)/octave/ls-R
-
-uninstall::
-	rm -f $(DESTDIR)$(datadir)/octave/ls-R $(DESTDIR)$(libexecdir)/octave/ls-R
-
 tags TAGS:: $(SOURCES)
 	$(subdir-for-command)
 

--- a/src/ChangeLog	Sat Feb 07 12:39:19 2009 -0500
+++ b/src/ChangeLog	Sun Feb 08 23:00:27 2009 -0500
@@ -1,3 +1,8 @@
+2009-02-08  John W. Eaton  <jwe@octave.org>
+
+	* octave.cc (initialize_pathsearch): Delete.
+	(octave_main): Don't call initialize_pathsearch.
+
 2009-02-07  John W. Eaton  <jwe@octave.org>
 
 	* parse.y (eval_string): Use the one true evaluator.